2022年11月21日星期一

Labeling machine for double sides adhesive sticker labels.

 

Labeling machine for double sides adhesive sticker labels.
Email: sinobema@yahoo.com
WhatsApp: 0086 137 2866 8423
Sino Beverage Machinery Co., Ltd (China)


2022年11月11日星期五

5-liter bottles washer, filler, cappre machine.

5-liter bottles washer, filler, cappre machine.

More models and more kinds of machiniery are available.
Email: sinobema@yahoo.com
WhatsApp: 0086 137 2866 8423
Sino Beverage Machinery Co., Ltd (China)
www.sinobema.com


2022年11月4日星期五

Whiskey distillery equipments.

Whiskey distillery equipments.

Hold your breath
let it go. After all the difficult times, you will embrace a bright future. Email: sinobema@yahoo.com WhatsApp: 0086 137 2866 8423 Sino Beverage Machinery Co., ltd (China) www.sinobema.com


2022年10月20日星期四

Wine bottling line

How about a bottle of wine?

Everything is dangerous. If it weren't so, life wouldn't be worth living.
A rose by any other name would smell as sweet.
We turn not older with years, but newer every day.
Email: sinobema@yahoo.com
WhatsApp: 0086 137 2866 8423
Sino Beverage Machinery Co., Ltd China
www.sinobema.com


2022年9月12日星期一

Common faults and solutions for sleeve labeling machine. Part one.

 Common faults and solutions for sleeve labeling machine. Part one.

 

A. Some labels can not get to the bottom or the set position of the bottles.

1) Too much water spot on the bottle surface. Normally, we can put a air blower dryer tunnel before the labeling machine to make sure the bottle surface can be dried before getting to the labeling machine.

2) Not enough plastic on the brushes. To put more plastic on the brush stick.

3) The label-down wheels position is too low on the label guide stick. If it is too low, then the label can not get down as a round label.

4) The label-down wheels are too right on the label guide stick.

 

B. The labels get jammed on the label guide stick very often.

1) The labels are not in correct size. If the diameter of the label is not correct, then it will get jammed.

2) Check the joint of the labels, and make sure it is connected well.

3) The space between drive wheels and the label guide stick is too limited. It can not be too tight, nor too loose.

4) Spring gets too far.

5) The cutting point is not correct.

 


C. Labels are not getting straight on the bottles.

1) The center of the bottle is not in straight with the center of the label guide stick.

2) The label guide stick is not fixed tight, and it shakes during working.

3) The photoelectric switch(the sensor which reads the coming of the bottles) is not fixed in the correct position.

 

D. Sometimes, more than one labels coming down for one bottle.

1) Label diameter is too bigger than the bottle’s diameter. Not suitable size.

2) Label-down wheels are too high. Then the labels will be brushed down and be cut by mistake.

 

E. Machine works not well after replacing the label rolls.

1) The label guide stick must be adjusted very well after replacing the labels rolls.

2) All wheels and sensors must be checked and rectified again.

3) Check if the labels diameter and thickness is the same as before. It affects a lot.


By Insomila

Sinobeverage Machinery Co., Ltd (China)

施诺机械设备有限公司(中国)

email: sinobema@yahoo.com 

WhatsApp: 0086 137 2866 8423

www.sinobema.com 

 

2022年9月6日星期二

Double sides labeling machine for wine bottles.

Nothing in this world that's worth having comes easy.

Never compromise. Not even in the face of armageddon.
Double sides labeling machine for wine bottles.
Email: sinobema@yahoo.com
WhatsApp: 0086 137 2866 8423
www.sinobema.com
Sino Beverage Machinery Co., Ltd(China)
施诺机械设备有限公司(中国)



2022年8月4日星期四

Linear model bottle washer filler capper machine

Suitable bottle size: 200ml to 2000ml. 

Suitable liquid: non-carbonated pure water

Bottle and caps: plastic bottles, plastic screw caps. 

Email: sinobema@yahoo.com 

WhatsApp: 0086 137 2866 8423

Sino Beverage Machinery Co., Ltd(China)

施诺机械设备有限公司(中国)

www.sinobema.com 



Pure water filling line machinery

  Pure water filling line machinery Email: sinobema@gmail.com WhatsApp: 0086 137 2866 8423 www.sinobema.com