Water bottle moding machine.

Water bottle moding machine.

More models and more kinds of machinery are available.
Email: sinobema@gmail.com
WhatsApp: 0086 137 2866 8423
Sino Beverage Machinery Co., Ltd China
www.sinobema.com

What is the air compressore gets very hot after 10 hours working?

 

Here are the most common causes, categorized from simplest to most complex:

1. Cooling and Ventilation Issues (Most Common)

• Poor Ventilation: The compressor is installed in a confined, hot, or poorly ventilated room with no fresh air circulation. It needs cool intake air to function correctly.
• Solution: Ensure the compressor has ample space (at least 1 meter on all sides), especially around the air intake and cooling fins. Move it to a cooler, well-ventilated location.
• Clogged Cooling Fins/Ribs: The radiator fins (often located around the cylinder) are blocked with dust, dirt, oil, and debris. This acts like an insulator, preventing heat from escaping.
• Solution: With the power off, thoroughly clean the cooling fins using compressed air or a soft brush. Ensure the air passage is completely clear.
• Faulty Cooling Fan: The fan may be running slow, not running at all, or its blades may be damaged. In belt-driven models, the belt could be loose or slipping.
• Solution: Check the fan motor, power supply, and blades. For belt-driven models, tighten or replace the belt.

2. Lubrication Problems (Critical)

• Low or High Oil Level:
• Low Oil: Insufficient oil means there's not enough fluid to carry heat away from the piston and cylinder, leading to rapid temperature rise and severe wear.
• High Oil: Excess oil causes increased fluid friction (churning) and resistance, which also generates excessive heat.
• Solution: Check the oil sight glass when the compressor is off. The oil level must be between the "Min" and "Max" marks. Always use the manufacturer-recommended type and viscosity of compressor oil.
• Degraded or Incorrect Oil: Over time, oil oxidizes, contaminates, and loses its lubricating and cooling properties. Using the wrong type of oil (e.g., automotive motor oil) can cause carbon buildup and poor performance.
• Solution: Change the oil according to the manufacturer's service interval (e.g., every 500-800 hours). If the oil is dark, thick, or has a burnt smell, change it immediately.

3. Air Intake and System Pressure Issues

• Clogged Air Filter: A dirty air filter restricts intake air. The compressor has to work much harder (higher load) to draw in air, generating more heat for the same amount of output.
• Solution: Clean or replace the air filter. In dusty environments, this needs to be done more frequently.
• Faulty Valves (Inlet/Discharge): Worn, broken, or leaking valve plates/springs reduce compression efficiency. Air can be trapped and re-compressed within the cylinder, creating massive amounts of excess heat.
• Symptoms: Longer cycle times to reach pressure, increased electricity consumption, and high temperatures.
• Solution: This requires a professional technician to inspect and rebuild or replace the valve assembly.
• High Operating Pressure: The pressure switch might be set too high, forcing the compressor to operate beyond its design limits.
• Solution: Check and adjust the cut-out pressure to the compressor's specified rating.

4. Mechanical Wear

• Worn Piston Rings or Cylinder: Over time, these components wear out, causing internal blow-by (air leaking past the piston). This drastically reduces compression efficiency and increases heat generation.
• Solution: This is a major overhaul requiring disassembly and replacement of parts by a qualified technician.

From Sino Beverage Machinery Co., Ltd China.

Email: sinobema@gmail.com 

WhatsApp: 0086 137 2866 8423

www.sinobema.com

 

Bottle molding machine, to make PET bottles for water/tea/coffee Etc.

 Bottle molding machine, to make PET bottles for water/tea/coffee Etc.

Morel models and more kinds of machinery are available.
Email: sinobema@gmail.com
WhatsApp: 0086 137 2866 8423
www.sinobema.com
Sino Beverage Machinery Co., Ltd China

Shrink warapping packing machine for water bottles

 Shrink warapping packing machine for water bottles

Email: sinobema@gmail.com
WhatsApp: 0086 137 2866 8423
www.sinobema.com

Filling machiner/filler for smaller size bottles.

Filling machiner/filler for smaller size bottles. 

More models and more kinds of machinery are available 

Email: sinobema@gmail.com

WhatsApp: 0086 137 2866 8423 

www.sinobema.com from Sino Beverage Machinery Co., Ltd China 

Bottle molding machine for special kinds of container/bottle.

Bottle molding machine for special kinds of container/bottle. 

More models are available. 

Email: sinobema@gmail.com 

WhatsApp: 0086 137 2866 8423

www.sinobema.com 

From Sino Beverage Machinery Co., Ltd China

5 gallon bottles washer, filler, capper machine.

More models and more kinds of machinery are available.
Email: sinobema@gmail.com
WhatsApp: 0086 137 2866 8423
www.sinobema.com
Sino Beverage Machinery Co., Ltd

5gallon bottle washer, filler,capper machine

 5gallon bottle washer, filler,capper machine

More models and more kinds of machinery are available.
Email: sinobema@gmail.com
WhatsApp: 0086 137 2866 8423
Sino Beverage Machinery Co., Ltd China
www.sinobema.com

Capper machine for plastic bottles

 Capper machine for plastic bottles

WhatsApp: 0086 137 2866 8423
Email: sinobema@gmail.com
www.sinobema.com

5 gallon bottles brush washer machine.

 5 gallon bottles brush washer machine.

more models and more kinds of machinery are available.
WhatsApp: 0086 137 2866 8423
Email: sinobema@gmail.com
www.sinobema.com
Sino Beverage Machinery Co., Ltd China

Special model of capping device, capper machine

Special model of capping device, capper machine

More models and more kinds of machinery are available.
Email: sinobema@gmail.com
WhatsApp: 0086 137 2866 8423
www.sinobema.com

capper machinery.capping machine

 capper machinery.capping machine

Email: sinobema@gmail.com
WhatsApp: 0086 137 2866 8423
More models and more kinds of machinery are available.

Simple bottle capping machine.

 Simple bottle capping machine.

WhatsApp: 0086 137 2866 8423
Email: sinobema@gmail.com
Sino Beverage Machinery Co., Ltd China

Linear model bottle shrink packing machine

Bottles shrink packing machine.

Email: sinobema@gmail.com
WhatsApp: 0086 137 2866 8423
www.sinobema.com

4 caivty semi automatic bottle molding machine.

4 caivty semi automatic bottle molding machine.

More models and more machinery are available.
Email: sinobema@gmail.com
WhatsApp: 0086 137 2866 8423
www.sinobema.com

Bottle molding machine

Bottle molding machine.

Email: sinobema@gmail.com
WhatsApp: 0086 137 2866 8423
www.sinobema.com

capping machine, capper machine

The beauty of mechanics, capping device. Email: sinobema@gmail.com WhatsApp: 008613728668423 www.sinobema.com
 

Bottle washer, filler, capper machine

 Bottle washer, filler, capper machine

Email: sinobema@gmail.com
WhatsApp: 0086 137 2866 8423
www.sinobema.com

Bottle packing machine

Pack the water, pack the happiness.

Email: sinobema@gmail.com
WhatsApp: 0086 137 2866 8423
www.sinobema.com

Labeling machine for shrinkable PVC labels

A shrink sleeve labeling machine applies shrinkable PVC labels to bottles or containers with precision. Using heat, it ensures a secure, seamless fit. Ideal for various industries, it enhances branding with 360° coverage, providing durability, moisture resistance, and a professional finish.

Email: sinobema@gmail.com
WhatsApp: 0086 137 2866 8423
www.sinobema.com

Linear model hot glue labeling machine, OPP labeling machine.

Linear model hot glue labeling machine, OPP labeling machine.

Email: sinobema@gmail.com WhatsApp: 0086 137 2866 8423 www.sinobema.com

Labeling machine for big bottles, adhesive stickers

 

Our trip is to the ocean of starts.
Labeling machine for big bottles.
Email: sinobema@gmail.com
WhatsApp: 0086 137 2866 8423
www.sinobema.com

Bottling&molding machinery supplier.

 Bottling&molding machinery supplier.

Email: sinobema@gmail.com

WhatsApp: 0086 137 2866 8423

www.sinobema.com

Happy Chinese New Year

As the Chinese New Year approaches, we welcome the arrival of a fresh start and new beginnings. This time of year brings with it the promise of renewal, hope, and happiness. I want to extend my warmest wishes to you and your loved ones as we embrace the spirit of this auspicious season.

May this year bring you an abundance of joy, health, and prosperity. Just like the bright fireworks that light up the sky, may your life be filled with brightness, energy, and passion. Let every day of this year be a step towards achieving your dreams, and may all your endeavors flourish.

In the spirit of Chinese tradition, may the new year bless you with good fortune, success, and happiness. May your family be united, your home full of laughter, and your heart overflowing with love. Remember that in Chinese culture, the Spring Festival symbolizes a fresh start, so let’s embrace each moment with optimism, gratitude, and compassion.

As the Year of the Snake approaches, let us ride the waves of courage and strength it represents. May you soar higher and reach new heights in both your personal and professional life. Happy Chinese New Year!

Our holiday starts from January 23 to Febuary 6.

wish you all the best.

Flat surface l abeling machine for adhesive sticker lables.

Flat surface l abeling machine for adhesive sticker lables.

Email: sinobema@gmail.com
WhatsApp: 0086 1378 2866 8423
https://www.sinobema.com