HDPE bottles molding machine

HDPE bottles molding machine

More models and more kinds of machinery are available

Email: sinobema@gmail.com

WhatsApp: 0086 137 2866 8423

Sino Beverage Machinery Co., Ltd (China)

www.sinobema.com 

Semi auto bottle moldine machine.

Semi automatic PET bottle moldine machine.

It makes bottles from 6 liters to 20 liters by different sets of bottle molds. 

From Sino Beverage Machinery Co., Ltd (China)

Email: sinobema@gmail.com 

WhatsApp: 0086 137 2866 8423

18.9 liter, bottling plant

Bottling plant for 18.9 liter water bottles. 

1, Caps remover machine, to remove the caps from the recycled bottles.

2, In&external brush washer machine, to brush and wash the recycled bottles. 

3, Bottle loading/feeding system, to feed the bottles into the main machine.

4, Main washer filler capper machine.

5, Cap seals shrink machine

and necessary conveyot belts.

From Sino Beverage Machinery Co., Ltd (China)

www.sinobema.com 

WhatsApp:+86 137 2866 8423

Email: sinobema@gmail.com 

Steam generator trouble shooting.

 After sometimes working, the pressure of the steam generator drops, and which can not supplier enough steam for the shrink tunnel of the labeling machine.

 

There are some possible reasons as following

 

1, The electricity phase is not enough. Machines are designed for 3phase (380V/50HZ, or 220V/60HZ). Get a electrician to check the power supply system, and make sure the wire connections are correct.

 

2, Check if the water pump is working well. When you turn on the steam generator, the pump will pump the water into the water tank full-automatically. While the machine will stop when the water tank is full due to the water-level floating ball is equipped inside the water tank.

  And when the water level inside the water tank is slower than set level, the pump will start work again full automatically.

 

3, Check if the pressure gauge is working well. When the pressure of the steam reaches to 0.38Mpa, then which means the steam is enough and ready for going out.

  At this time, you can open the valve, and let the steam flow into the shrink tunnel.

 

4, Drain the waste water in the steam pot.

everyday after work, the remain steam inside the tank should be let off. if not, then when the steam get cold, it will become water, and it will be negative pressure inside the water pot and which will suck the water back into the steam pot. Once there are water inside the steam pot, then the space inside the steam pot will be not enough for storing more steam.

You will have to open the valve and let go the water inside the steam pot. And keep enough space for steam pot.

 

5, During operation, if the alternating current keep on switching on and off. You will need to check the power supply to see if the voltage is enough.

 

6, Clean the water scale on the heater. Water scale occurs after long time work if raw water are being used for steam generator.

  Check and clean the water heater regularly. Or better use pure water.

 

7, If the water pumps keeps pumping without stopping, then check the water level floating ball inside the water tank, which may need to be replaced.

From Sino Beverage Machinery Co., Ltd (China)

施诺机械设备有限公司（中国）

Email: sinobema@gmail.com 

WhatsApp: +86 137 2866 8423

www.sinobema.com 

bottles filler machine

bottles filler machine.

Email: sinobema@gmail.com

WhatsApp:+86 137 2866 8423

www.sinobema.com

From Sino Beverage Machiniery Co., Ltd(China)

5-liter bottles washer filler capper machine

5-liter bottles washer filler capper machine

More models and more kind of machinery are available.

Email: sinobema@gmail.com 

WhatsApp:+86 137 2866 8423

Sino Beverage Machinery Co., Ltd(China)

www.sinobema.com 

PET bottles molding machinery

PET bottles molding machinery.

100ml to 20000ml bottles can be done.

By different machines and different molds

Email: sinobema@gmail.com

WhatsApp: +86 137 2866 8423

www.sinobema.com

Sino Beverage Machinery Co., Ltd (China)

Full-automatic labeling machine

Full-automatic labeling machine, designed for PVC shrinkable labels.

for more information, please feel free to contact us.

Email: sinobema@yahoo.com

WhatsApp/Monile: +86 137 2866 8423

From Sino Beverage Machinery Co., Ltd (China)

Bottle washer filler capper machine

Bottle washer filler capper machine

Designed for plastic water bottles, with plastif screw type caps.

Bottles size ranges from 100ml to 2000ml.

It filles around 5000-8000 bottles per hour based on 500ml water bottles.

For more information, please feel free to contact us.

Email: sinobema@yahoo.com

WhatsApp/Mobile: +86 137 2866 8423

From Sino Beverage Machinery Co., Ltd China

www.sinobema.com

Labeling machine for PVC shrinkable labels.

Labeling machine for PVC shrinkable labels.

For more details, please contact us.

Email: sinobema@gmail.com

WhatsApp/Mobile: +86 137 12866 8423

www.sinobema.com

Sino Beverage Machnery Co., Ltd (China)